Garage Door Service – Things to Stress Upon

See How a Garage Door Enhances Curb Appeal - Easy Flip Garage Doors

Homeowners often underestimate the importance of garage door repair and maintenance services. You will have to service your garage door periodically, just like you need to services your favorite car to enhance its life span. In the following article, we will learn important facts of garage door maintenance services and points you should stress upon.

Garage door repair: Before conducting garage door repairs, it is good to understand what garage door is and how it’s operating mechanism works? If you have an overhead garage door either swing up in one piece or roll up in sections. These garage doors have one large spring which is mounted at the center of the garage door opening. They run on the metal tracks along with the walls of the garage. Most garage door services like, best garage door repair service in Dallas, Texas are needed to fix or replace either the springs or the metal tracks of a garage door.

The Best Garage Door Styles | Estrella Rocks

First of all, check the metal tracks. Don’t forget to inspect the mounting brackets as well. During garage door maintenance services, you might need to fix the dented tracks and tighten the loose screws and bolts inside the mounting brackets. Garage door tracks need to be checked thoroughly for any occurrences of crimps, dents, or flat spots. These problems can be fixed with the help of rubber mallet. Use a block of scrap wood and a plastic hammer to get rid of dents. If the tracks are damaged beyond the repair, they should be replaced immediately with the new ones.

In the second stage of garage door maintenance, you should check the balance or alignment of garage door tracks. Normally, the horizontal tracks should be adjusted slightly down forward. The direction of the tracks should be adjusted towards the back of the garage door. In the roll-up garage doors, the vertical portions of the tracks should be perpendicular. In case, you experienced that tracks are not properly aligned, simply lose the hardware which holds the mounting brackets. Tap the tracks gently to reposition them accurately. Then tighten the screws carefully to secure the mounting brackets.  

In the next stage of garage door maintenance services, you should clean the tracks with the help of mild household detergent to remove the dirt, dust, and grease. In addition to this, garage door rollers should be cleaned thoroughly. After completing the cleaning process, wipe out both the rollers and tracks using a cotton cloth to make them dry enough. If the rollers look rusted or damaged, they should be replaced immediately.

Different Types of Garage Doors -

In the next process, you will have to lubricate all the moving parts including tracks, rollers, and mounting brackets. You may use WD-40, powdered graphite, any other high-quality lubricant spray. You may also use any household oil or good silicone spray. The next process of garage door services relates to hardware parts. If you found loose hardware in your mechanism, you should tighten them. If you have a swing-up garage door, check the conditions of springs. If you have a rollover garage door, you should check their hinges.

The last but important step of garage door maintenance involves the garage door springs. if springs got to lose, you will have to shift the hook to the next notch or hole in order to adjust the tension of springs. If you have a roll-over garage door, you will have to adjust the tension by pulling the rod through the plate. In the case, of damaged springs, they should be replaced with the new one. It is always recommended to call a professional garage door expert to handle garage door torsion springs.